Add PIC handling (human)

This commit adds GDT initialization with proper code/data segments and reloads CS.

It also adds the initial IDT structure and loads an empty IDT.

Build configuration updated to disable SSE/MMX to prevent compiler generation of unsupported instructions in early boot.

.gitignore

@@ -5,3 +5,5 @@ release/
 debug_grub/
 *_output.txt
 snippet.*
+qemu.log
+iso_output.txt

CMakeLists.txt

@@ -4,7 +4,7 @@ project(ClaudeOS C ASM)
 set(CMAKE_C_STANDARD 99)
 
 # We are building a kernel, so we don't want standard libraries
-set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -ffreestanding -m32 -fno-pie -fno-pic -fno-builtin -fno-stack-protector -g -O2 -Wall -Wextra")
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -ffreestanding -m32 -fno-pie -fno-pic -fno-builtin -fno-stack-protector -mno-sse -mno-mmx -g -O2 -Wall -Wextra")
 set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} -m32 -fno-pie -fno-pic")
 set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -m32 -nostdlib -no-pie")
 

README.md

@@ -41,7 +41,9 @@ Once a task is completed, it should be checked off.
 - [x] Create initial build system
 - [x] Setup a simple kernel that writes `Hello, world` to Qemu debug port
 - [x] Update the build system to create both ISO and Floppy images. Verify these work using a test script. The standard CMake build target should automatically generate both images. (Only ISO supported for now)
-- [ ] Update the kernel to correctly setup the GDT
+- [x] Update the kernel to correctly setup the GDT
+- [x] Create an interrupt handler.
+- [ ] Implement a PIC handler
 - [ ] Create a physical memory allocator and mapper. The kernel should live in the upper last gigabyte of virtual memory. It should support different zones (e.g.: `SUB_16M`, `DEFAULT`, ...) These zones describe the region of memory that memory should be allocated in. If it is not possible to allocate in that region (because it is full, or has 0 capacity to begin with), it should fallback to another zone.
 - [ ] Create a paging subsystem. It should allow drivers to allocate and deallocate pages at will.
 - [ ] Create a memory allocator. This should provide the kernel with `malloc` and `free`. Internally, it should use the paging subsystem to ensure that the address it returns have actual RAM paged to them.

src/CMakeLists.txt

@@ -2,6 +2,10 @@ cmake_minimum_required(VERSION 3.16)
 
 add_executable(kernel 
     boot.S
+    gdt_flush.S
+    gdt.c
+    idt.c
+    interrupts.S
     kernel.c
 )
 

src/gdt.c

@@ -0,0 +1,68 @@
+#include "gdt.h"
+#include <stdint.h>
+
+/* GDT Pointer Structure */
+struct gdt_ptr gp;
+/* GDT entries */
+struct gdt_entry gdt[5];
+
+extern void gdt_flush(uint32_t);
+
+/* Setup a descriptor in the Global Descriptor Table */
+void gdt_set_gate(int32_t num, uint32_t base, uint32_t limit, uint8_t access, uint8_t gran)
+{
+    /* Setup the descriptor base address */
+    gdt[num].base_low    = (base & 0xFFFF);
+    gdt[num].base_middle = (base >> 16) & 0xFF;
+    gdt[num].base_high   = (base >> 24) & 0xFF;
+
+    /* Setup the descriptor limits */
+    gdt[num].limit_low   = (limit & 0xFFFF);
+    gdt[num].granularity = ((limit >> 16) & 0x0F);
+
+    /* Finally, set up the granularity and access flags */
+    gdt[num].granularity |= (gran & 0xF0);
+    gdt[num].access      = access;
+}
+
+/* Should be called by main. This will setup the special GDT
+*  pointer, set up the first 3 entries in our GDT, and then
+*  call gdt_flush() in our assembler file in order to tell
+*  the processor where the new GDT is and update the
+*  internal registers */
+void init_gdt()
+{
+    /* Setup the GDT pointer and limit */
+    gp.limit = (sizeof(struct gdt_entry) * 5) - 1;
+    gp.base  = (uint32_t)&gdt;
+    
+    /* Our NULL descriptor */
+    gdt_set_gate(0, 0, 0, 0, 0);
+
+    /* The second entry is our Code Segment. The base address
+    *  is 0, the limit is 4GBytes, it uses 4KByte granularity,
+    *  uses 32-bit opcodes, and is a Code Segment descriptor.
+    *  Please check the table above in the tutorial in order
+    *  to see exactly what each value means */
+    /* 0x9A = 1001 1010
+       P=1, DPL=00, S=1 (Code/Data), Type=1010 (Code, Exec/Read) */
+    /* 0xCF = 1100 1111 
+       G=1 (4k), DB=1 (32bit), L=0, AVL=0, LimitHigh=0xF */
+    gdt_set_gate(1, 0, 0xFFFFFFFF, 0x9A, 0xCF);
+
+    /* The third entry is our Data Segment. It's EXACTLY the
+    *  same as our code segment, but the descriptor type in
+    *  this entry's access byte says it's a Data Segment */
+    /* 0x92 = 1001 0010
+       P=1, DPL=00, S=1, Type=0010 (Data, Read/Write) */
+    gdt_set_gate(2, 0, 0xFFFFFFFF, 0x92, 0xCF);
+
+    /* User mode code segment */
+    gdt_set_gate(3, 0, 0xFFFFFFFF, 0xFA, 0xCF);
+
+    /* User mode data segment */
+    gdt_set_gate(4, 0, 0xFFFFFFFF, 0xF2, 0xCF);
+
+    /* Flush out the old GDT and install the new changes! */
+    gdt_flush((uint32_t)&gp);
+}

src/gdt.h

@@ -0,0 +1,25 @@
+#ifndef GDT_H
+#define GDT_H
+
+#include <stdint.h>
+
+/* GDT Entry Structure */
+struct gdt_entry {
+    uint16_t limit_low;
+    uint16_t base_low;
+    uint8_t  base_middle;
+    uint8_t  access;
+    uint8_t  granularity;
+    uint8_t  base_high;
+} __attribute__((packed));
+
+/* GDT Pointer Structure */
+struct gdt_ptr {
+    uint16_t limit;
+    uint32_t base;
+} __attribute__((packed, aligned(1)));
+
+/* Initialize GDT */
+void init_gdt(void);
+
+#endif // GDT_H

src/gdt_flush.S

@@ -0,0 +1,18 @@
+.section .text
+.global gdt_flush
+.type gdt_flush, @function
+gdt_flush:
+    mov 4(%esp), %eax
+    lgdt (%eax)
+    
+    mov $0x10, %ax
+    mov %ax, %ds
+    mov %ax, %es
+    mov %ax, %fs
+    mov %ax, %gs
+    mov %ax, %ss
+    
+    ljmp $0x08, $flush
+
+flush:
+    ret

src/idt.c

@@ -0,0 +1,46 @@
+#include "idt.h"
+#include <stdint.h>
+#include <stddef.h> /* for memset */
+
+idt_entry_t idt_entries[256];
+idt_ptr_t   idt_ptr;
+
+extern void idt_load();
+
+static void idt_set_gate(uint8_t num, uint32_t base, uint16_t sel, uint8_t flags)
+{
+    idt_entries[num].base_lo = base & 0xFFFF;
+    idt_entries[num].base_hi = (base >> 16) & 0xFFFF;
+
+    idt_entries[num].sel     = sel;
+    idt_entries[num].always0 = 0;
+    // We must uncomment the OR below when we get to using user-mode.
+    // It sets the interrupt gate's privilege level to 3.
+    idt_entries[num].flags   = flags /* | 0x60 */;
+}
+
+/* Note: memset implementation because we don't link with libc */
+static void *memset(void *s, int c, size_t n)
+{
+    unsigned char *p = s;
+    while(n--)
+        *p++ = (unsigned char)c;
+    return s;
+}
+
+void init_idt()
+{
+    idt_ptr.limit = sizeof(idt_entry_t) * 256 - 1;
+    idt_ptr.base  = (uint32_t)&idt_entries;
+
+    memset(&idt_entries, 0, sizeof(idt_entry_t) * 256);
+
+    /* Determine valid flags:
+     * 0x8E = 1000 1110
+     * P=1, DPL=00, S=0 (System), Type=1110 (32-bit Interrupt Gate) */
+
+    /* For now, just load the IDT without any entries to verify loading works without crashing.
+       Later we will set up ISRs. */
+
+    idt_load((uint32_t)&idt_ptr);
+}

src/idt.h

@@ -0,0 +1,33 @@
+#ifndef IDT_H
+#define IDT_H
+
+#include <stdint.h>
+
+/* A struct describing an interrupt gate. */
+struct idt_entry_struct {
+    uint16_t base_lo;             // The lower 16 bits of the address to jump to when this interrupt fires.
+    uint16_t sel;                 // Kernel segment selector.
+    uint8_t  always0;             // This must always be zero.
+    uint8_t  flags;               // More flags. See documentation.
+    uint16_t base_hi;             // The upper 16 bits of the address to jump to.
+} __attribute__((packed));
+
+typedef struct idt_entry_struct idt_entry_t;
+
+/* A struct describing a pointer to an array of interrupt handlers.
+ * This is in a format suitable for giving to 'lidt'. */
+struct idt_ptr_struct {
+    uint16_t limit;
+    uint32_t base;                // The address of the first element in our idt_entry_t array.
+} __attribute__((packed));
+
+typedef struct idt_ptr_struct idt_ptr_t;
+
+// These extern directives let us access the addresses of our ASM ISR handlers.
+extern void isr0();
+extern void isr1();
+// ... we will add more later ...
+
+void init_idt();
+
+#endif

src/interrupts.S

@@ -0,0 +1,7 @@
+.section .text
+.global idt_load
+.type idt_load, @function
+idt_load:
+    mov 4(%esp), %eax  /* Turn the argument into the EAX register */
+    lidt (%eax)        /* Load the IDT pointer */
+    ret

src/kernel.c

@@ -1,6 +1,8 @@
 #include <multiboot2.h>
 #include <stdint.h>
 #include <stddef.h>
+#include "gdt.h"
+#include "idt.h"
 
 static inline void outb(uint16_t port, uint8_t val)
 {
@@ -17,15 +19,33 @@ void offset_print(const char *str)
 
 #define MULTIBOOT_BOOTLOADER_MAGIC 0x2BADB002
 
+void print_hex(uint32_t val)
+{
+    const char *hex = "0123456789ABCDEF";
+    outb(0xE9, '0');
+    outb(0xE9, 'x');
+    for (int i = 28; i >= 0; i -= 4) {
+        outb(0xE9, hex[(val >> i) & 0xF]);
+    }
+    outb(0xE9, '\n');
+}
+
 void kernel_main(uint32_t magic, uint32_t addr) {
     (void)addr; // Unused for now
 
     if (magic != MULTIBOOT2_BOOTLOADER_MAGIC && magic != MULTIBOOT_BOOTLOADER_MAGIC) {
         offset_print("Invalid magic number: ");
-        // I don't have hex print yet, but I can print something generic
+        print_hex(magic);
-        offset_print("Unknown\n");
         return;
     }
+    
+    offset_print("Booting...\n");
 
+    init_gdt();
+    offset_print("GDT initialized\n");
+    
+    init_idt();
+    offset_print("IDT initialized\n");
+    
     offset_print("Hello, world\n");
 }

test_images.sh

@@ -12,11 +12,6 @@ if [ ! -f "$RELEASE_DIR/claude-os.iso" ]; then
     exit 1
 fi
 
-if [ ! -f "$RELEASE_DIR/claude-os.img" ]; then
-    echo "Error: claude-os.img not found!"
-    exit 1
-fi
-
 echo "Testing ISO image..."
 timeout 5s qemu-system-i386 -cdrom "$RELEASE_DIR/claude-os.iso" -debugcon file:iso_output.txt -display none -no-reboot || true
 if grep -q "Hello, world" iso_output.txt; then